Fill Valve Replacement in Telluride, CO
The fill valve is the tall assembly on the left side of the tank that refills it after each flush. When it wears out, you hear it: a long hiss, a refill that takes minutes, or a valve that never quite closes.
A-1 Plumbing Services connects Telluride, CO homeowners with plumbers who replace worn fill valves with modern float-cup valves, or with the manufacturer's own part when the toilet calls for it. Old ballcock valves with a brass arm and a big float ball are worth replacing outright.
The job: shut off the supply, drain the tank, remove the old valve through the tank hole, set the new valve so its critical level mark sits at least an inch above the overflow tube, then adjust the water line.
Hard water shortens fill valve life. Mineral grit clogs the small inlet screen and scores the seal cap. If yours keeps failing, ask about a valve with a replaceable seal.
Call A-1 Plumbing Services at (866) 303-3394 for fill valve replacement in Telluride, CO.
